SURGE’s Aluminium F Sections Key Features:
- Available in all thicknesses
- Available from 3 – 6 metre lengths
- Available in White and Brown
RAFTER
F Section Aluminium
An Aluminium extruded trim in the shape of an F.
What are Aluminium F Sections used for?
Aluminium F Sections are used for going over edges of Polycarbonate Sheeting to form a drip.
What is the best thing about Aluminium F Sections?
Aluminium F Sections are strong, durable, and available in 4 thicknesses and 2 colours, white and brown.
Why should you use STORM’s Aluminium F Sections?
STORM keep the Aluminium F Section in stock and also offers nationwide delivery.
Who are the type of consumers that would use Aluminium F Sections?
Glazing Installers, Building Contractors and DIY would all use Aluminium F Sections.
Where are Aluminium F Sections most commonly used?
Aluminium F Sections are most commonly used on the edge of Polycarbonate Sheeting.
When should an Aluminium F Section be considered and Installed?
Aluminium F Sections should be used when installing a Polycarbonate Roof.
What are the advantages of Aluminium F Sections?
The advantages of Aluminium F Sections is that they are strong, durable, and available to suit a range of polycarbonate thicknesses.
What are the disadvantages of Aluminium F Sections?
The disadvantages of Aluminium F Sections is that you need a hacksaw to cut and more expensive than PVC F Sections.
What Polycarbonate can you use with Aluminium F Sections?
You can you Aluminium F Sections with 10mm Twinwall, 16mm Multiwall, 25mm Multiwall and 35mm Multiwall Polycarbonate only.
SURGE’s Aluminium F Sections are ideal for:
- Finishing off the perimeter of Polycarbonate Sheeting
