Rafter Supported Edge Trim key features:
- A flexible top half allowing different thicknesses to be accommodated with 1 trim
Home > Products > Polycarbonate Roofing > Rafter Supported Roof System (Snap Down) > Rafter Bar Edge Trim
< BackProduct Code: N/A
The Rafter Bar Edge Trim is to be used in conjunction with the Rafter Supported Glazing Bar. Unlike the Self Support roof it does not replace the actual bar.
The Rafter Bar is to be ordered separately HERE.
Rafter Supported Edge Trim key features:
An Edge Trim is a PVC trim that clips or slides into the edge of a Rafter Supported Glazing Bar.
An Edge Trim is used to convert a standard Rafter Supported Glazing Bar into an Edge Bar.
An Edge Trim is flexible in taking different thicknesses of glazing and is available in 6 lengths (2m, 2.5m, 3m, 4m, 5m and 6m).
STORM’s Edge Trim should be used as it is always available from stock along with a range of complimentary items. STORM also offer a nationwide delivery to all customers.
Glazing Installers, Building Contractors and DIY are the type of consumers that would use an Edge Trim.
Edge Trims are most commonly used to convert a Rafter Supported Glazing Bar into an Edge Bar to finish off a roof.
Edge Trims should be installed at both ends of a roof.
Rafter Supported Edge Trim is ideal for: